Balustrade Methods

At Miami Stainless we have several stainless steel wire balustrade methods available. From our simple DIY hand swaged balustrade methods to the more professional looking streamline wire balustrade methods we can find a system that will best suit your needs. We have a huge selection of quality stainless steel fittings in stock meaning goods are almost always dispatched the same day they are ordered. We provide a full in house swaging service with very quick turnaround times (usually 1-2 days). If you need help or advice you can call one of our friendly staff on 1800 022 122, or you can fax (1800 022 199) or email us a plan of your balustrade and we will contact you with recommendations or a quote. Most wire balustrade methods can be easily adapted to suit timber or steel posts.

Click on the pictures below to view our most popular methods in more detail

The Standard Hand Swaged method is an ideal balustrade method for the DIY customer, or those who are on a budget but still want a professional looking stainless steel wire balustrade. This method is easily achievable with common handyman skills, and comes with simple step by step instructions. This method can be easily adapted to suit timber or steel posts. All fittings and wire in this method are 316 (marine) grade stainless steel (excludes screws - 304).

Due to new BCA regulations this method in now suitable with 80mm wire spacing

FAQ About This Method  

Can I install this method myself? Yes; even someone with no experience can easily install any of our methods.

Do I need any special tools? Other than common handyman tools you will need a hand swaging tool and wire rope cutter. You can purchase a basic hand swaging tool and cutter from Miami Stainless for $45 + GST. 

What size and type of wire do I use? When doing the standard hand swaged method 3mm 7 x 7 stainless steel wire is almost always used. You can not use 1 x 19 wire as it is too rigid to loop around a thimble

What spacing do I need between my wires? When using 3mm 7 x 7 wire you will usually need 80mm spacing (11 runs) between your wires. Click here for more information on balustrade regulations.

What is the maximum length run I can do? Around 10 metres using a 5mm bottlescrew. You can achieve runs of up to 20 metres if you put a bottlescrew at each end.

What size hole should I drill through my intermediate posts? A 4mm hole through your intermediate posts will allow enough room to thread your wire through. Please note: If you are using grommets the drill size will need to be 11/32" at least 10mm in to each side of your intermediate post.

Can I take my wire around corners? Miami Stainless highly recommends that you do not bend your wire around corners; this can cause fatigue on your wire, put excessive stress on your posts, and make it difficult to get the required tension.

Can I use this method if I have timber posts? Yes

Can I use this method if I have steel posts? Yes you can, however the fastenings to attach the saddles will need to be changed to either rivets or self drilling screws, there may also be a slight difference in price.

What do I need to get a quote? To get a free no obligation quote you will need to let us know how many and how long each section of your balustrade is. We will also need the distance between your decking and the underside of your handrail, so we can work out how many runs of wire you will need. You can either email us at info@miamistainless.com.au, call us on 1800 022 122, or fax us at 1800 022 199.

How do I order? If you know exactly what you require or you have obtained a quote from Miami Stainless simply contact us with a confirmation of your order. At this time we will require payment for your order, this can be done by either credit card over the phone (do not email credit card details) You can also deposit the funds in to our bank account once we have given you the total (please fax or email payment confirmation).

How much will freight cost me and when can I expect delivery? This method can be dispatched same day payment is recieved. Miami Stainless has a maximum freight charge of $12(+gst) Australia wide. Please note: This does not include Air freight.

Delivery Times: Approximate only. For an exact delivery time please contact us on 1800 022 122.

QLD, ACT, & NSW: 1-2 working days  VIC & SA: 2-3 working days  TAS: 5-6 working days  NT & WA: 6-7 working days

What should I do if I have any further questions? If you have any further questions please contact Miami Stainless on 1800 022 122 or at info@miamistainless.com.au and one of our friendly staff will be happy to help you.

Over 300 Product Lines - Download Complete Catalogue (1.3mb)

Within Australia Free Call : 1800 022 122 - or email: info@miamistainless.com.au