Balustrade Methods

At Miami Stainless we have several stainless steel wire balustrade methods available. From our simple DIY hand swaged balustrade methods to the more professional looking streamline balustrade methods we can find a system that will best suit your needs. We have a huge selection of quality stainless steel fittings in stock meaning goods are almost always dispatched the same day they are ordered. We provide a full in house swaging service with very quick turnaround times (usually 1-2 days). If you need any help or advice you can call one of our friendly staff on 1800 022 122, or you can fax (1800 022 199) or email us a plan of your balustrade and we will contact you with recommendations or a quote. Most wire balustrade methods can be easily adapted to suit timber or steel posts.

  Click on the pictures below to view our most popular methods in more detail

The Nutsert Swage System is another balustrade method with an exceptionally slimline look. Your wires will arrive to your door pre-swaged to your exact measurements, meaning a very quick and simple installation. Just simply insert the  LHT/RHT Nut Rivets (Nutserts) in to your posts using Nut Rivet Insert Tool. Once inserted the LHT/RHT swage studs are then threaded in to the inserts at each end to create tension on the wire.

Please Note: This method is only suitable for Steel Tube posts and is not suitable for stairs.

FAQ About This Method  

Can I install this method myself? Yes; even someone with no experience can easily install all our methods.

Do I need any special tools? Other than common handyman tools, You will also require a Nut Rivet Insert Tool. Please Note: A standard Nut Rivet Insert Tool will not insert LHT Nut Rivets. Please contact Miami Stainless for details.

What size and type of wire do I use? This method is almost always used with 3.2mm 1 x 19 stainless steel wire; this wire is the sleekest and is more than strong enough for a balustrade.

What spacing do I need between my wires? When using 3.2mm 1 x 19 wire you will usually need 80mm spacing (11 runs) between your wires. Please click here for more information on wire balustrade regulations.

What size pilot hole should I drill for my Nut Rivets? You will need to drill a 10mm hole in to the inside face of your post.

What is the maximum length run I can do? Up to around 8-10 metres. Longer swage studs can be used to achieve runs up to around 12 metres, however this may be dependent on post sizing.

What size hole should I drill through my intermediate posts? A 7.5mm hole through your intermediate posts will allow the swage stud fit through. Please note: If you are using grommets the drill size will need to be 11/32" at least 10mm in to each side of your intermediate post.

Can I take my wire around corners? With this method it is not possible to bend your wire around corners.

Can I use this method if I have timber posts? No, but have a look at the Insert Swage System.

Can I use this method if I have steel posts? Yes.

What do I need to get a quote? To get a free no obligation quote you will need to let us know how many and how long each section of your balustrade is. We will also need the distance between your decking and the underside of your handrail, so we can work out how many runs of wire you will need. You can either email us at info@miamistainless.com.au, call us on 1800 022 122, or fax us at 1800 022 199.

How do I order? When you come to order your balustrade we will need you to email or fax us with your exact measurements from the outside to outside face of your posts. At this time we will require payment for your order, this can be done by either credit card over the phone (do not email credit card details). You can also deposit the funds in to our bank account once we have given you the total (please email or fax payment confirmation)

How much will freight cost me and when can I expect delivery? This method is usually dispatched within 1-2 days after payment. Miami Stainless has a maximum freight charge of $12(+gst) Australia wide. Please note: This does not include Air freight.

Delivery Times: Approximate only. For an exact delivery time please contact us on 1800 022 122.

QLD, ACT, & NSW: 1-2 working days  VIC & SA: 2-3 working days  TAS: 5-6 working days  NT & WA: 6-7 working days

What should I do if I have any further questions? If you have any further questions please contact Miami Stainless on 1800 022 122 or at info@miamistainless.com.au and one of our friendly staff will be happy to help you.

Over 300 Product Lines - Download Complete Catalogue (1.3mb)

Within Australia Free Call : 1800 022 122 - or email: info@miamistainless.com.au